BJRRM - 300 MOTOR OIL SAE 30--SG
- MSDS: BJRRM
- Manufacturer: AMOCO OIL CO
- Product Name: 300 MOTOR OIL SAE 30--SG
- National Stock Number: 9150-01-100-4612
Product Identification
Product ID:300 MOTOR OIL SAE 30--SG
MSDS Date:11/01/1990
FSC:9150
NIIN:01-100-4612
MSDS Number: BJRRM
Responsible Party
CHICAGO, IL 60601-6401
US
Emergency Phone: 800-447-8735/800-424-9300 CHEMTREC
Info Phone: 312-856-3907
Preparer: R. G. FARMER
Cage: 15958
Contractor
Telephone: 800 447-8735
Cage: 15958
Ingredients
OILS
Fraction By Weight: 100%
OSHA PEL 5 MG/M3 MIST
ACGIH TLV: 5 MG/M3 MIST
Hazards
LD50 LC50 Mixture:LD50 (ORAL RAT) IS ESTIMATED AT >10 G/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. AVOID BREATHING
OF MIST. PROLONGED OVEREXPOSURE MAY RESULT IN DERMATITIS AND
RESPIRATORY DIFFICULTIES. ANIMAL STUDIES ALSO SHOW AN EFFECT ON
THE KIDNEYS FOR EXPOSURE TO MATERI ALS SIMILAR TO THIS. ABOVE
TEMPERATURES OF 100F, ASPIRATION INTO THE LUNGS IS A HAZARD.
Explanation of Carcinogenicity:NONE OF THE CHEMICALS IN THIS PRODUCT IS
LISTED BY IARC, NTP OR OSHA AS A CARCINOGEN.
Effects of Overexposure:IRRITATION OF EYES AND SKIN UPON CONTACT.
IRRITATION OF THE RESPIRATORY TRACT, HEADACHES, DIZZINESS,
ANESTHETIC EFFECT AND OTHER CENTRAL NERVOUS SYSTEM EFFECTS
INCLUDING DEATH IN RARE CASES.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF EYE, SKIN
AND RESPIRATORY DISORDERS MAY BE AT INCREASED RISK FROM EXPOSURE.
First Aid
First Aid:EYE: IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR 15 MINUTES.
GET MEDICAL ATTENTION. SKIN: WASH WITH SOAP AND WATER. INHALATION:
REMOVE TO FRESH AIR. IF BREATHING IS IRREGULAR OR HAS STOPPED,
START RESU SCITATION AND ADMINISTER OXYGEN. GET MEDICAL HELP
IMMEDIATELY. INGESTION: DO NOT INDUCE VOMITING. GET MEDICAL
ATTENTION AT ONCE. IN CASE OF SUBCUTANEOUS OR INTRAMUSCULAR
INJECTION, SEEK HELP AT ONCE.
Fire Fighting
Flash Point Method:COC
Flash Point:424F,218C
Autoignition Temp:Autoignition Temp Text:470F
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, DRY CHEMICAL,
EARTH OR SAND. WATER MAY CAUSE FROTHING
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY. CONTAIN RUNOFF.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS.
Accidental Release
Spill Release Procedures:WEAR PROTECTIVE EQUIPMENT, ELIMINATE SOURCES
OF IGNITION, AND VENTILATE AREA AS REQUIRED. RECOVER FREE LIQUID.
ABSORB SMALL SPILL WITH INERT MATERIAL. PLACE WASTE IN DOT APPROVED
CONTAINER FOR DISPOSA L. KEEP MATERIAL FROM WATERWAYS.
Neutralizing Agent:NONE
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY, WELL VENTILATED
AREA AWAY FROM SOURCES OF IGNITION. KEEP CONTAINER CLOSED WHEN NOT
IN USE. PROTECT FROM PHYSICAL DAMAGE.
Other Precautions:AVOID BREATHING OF MIST. MINIMIZE PERIODS OF
EXPOSURE TO HIGH TEMPERATURE. AVOID WATER CONTAMINATION. KEEP
CONTAINER CLOSED.
Exposure Controls
Respiratory Protection:IF VENTILATION DOES NOT MAINTAIN INHALATION
EXPOSURES BELOW PEL (TLV), USE NIOSH/MSHA APPROVED RESPIRATOR AS
PER CURRENT 29 CFR 1910.134, INSTRUCTIONS/WARNINGS AND
NIOSH-RESPIRATOR SELECTION.
Ventilation:MECHANICAL (GENERAL) VENTILATION IS USUALLY ADEQUATE.
Protective Gloves:RUBBER GLOVES OR OTHER OIL RESISTANT.
Eye Protection:SAFETY GLASSES/CHEMICAL SPLASH GOGGLES
Other Protective Equipment:SAFETY SHOWER AND EYE BATH. INDUSTRIAL TYPE
WORK CLOTHING AND APRON AS REQUIRED TO AVOID PROLONGED OR REPEATED
CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING OR DRINKING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
USE AIR-SUPPLIED RESPIRATORY EQUIPMENT IF EXPOSED TO HOT FUMES. TREAT
EMPTY CONTAINERS AS DANGEROUS; DO NOT PRESSURIZE, CUT, WELD, BRAZE,
SOLDER, DRILL, GRIND OR EXPOSE CONTAINERS TO HEAT, FLAME, SPAR KS,
PILOT LIGHTS, STATIC ELECTRICITY. RESIDUE MAY BE DIFFICULT TO
REMOVE.
Chemical Properties
HCC:V6
Melt/Freeze Pt:M.P/F.P Text:0F,-18C
Spec Gravity:0.89
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK RED OILY LIQUID
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
OF IGNITION
Hazardous Decomposition Products:CARBON DIOXIDE,CARBON MONOXIDE,
ALDEHYDES AND KETONES, AND OTHER COMBUSTION PRODUCTS.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.